Packaged ionistor module
MIK

special purpose

AZHYAR.673623.025 TU Packaged ionistor module (MIK)

Under development. Completion date is November, 2019




Main parameters
NameValue
Rated voltage, V 5…30
Rated capacitance, F 4.16…25
Capacitance tolerance (25 °C, 50 Hz), % +50…-20; ±20
Maximum operating temperature Tenv, °C +65
Minimal operating temperature Tenv, °C -50, -60



Overall dimensions and mass of supercapacitor modules MIK
Name Type1 Version2 Dimensions, mm Mass, g
L±2 W±2 H±2 h1±2 h2±3
Module 5V х 7.5F 1 1 45 31 60 - 95 75
Module 5V х 25F 1 2 52 32 75.5 10 - 160
Module 7.5V х 5F 1 1 45 31 85 - 95 85
Module 7.5V х 16.66F 1 2 52 32 101.5 10 - 235
Module 10V х 12.5F 1 2 52 32 128 10 - 290
Module 12.5V х 10F 1 2 52 32 145 10 - 350
Module 15V х 8.33F 1 2 52 32 181 10 - 500
Module 20V х 6.25F 1 2 59 52 128 10 - 580
Module 25V х 5F 1 2 59 52 154 10 - 700
Module 30V х 4.16F 1 2 59 52 181 10 - 880
Module 5V х 7.5F 2 1 45 31 60 - 95 75
Module 5V х 25F 2 2 52 32 75.5 10 - 160
Module 7.5V х 5F 2 1 45 31 85 - 95 85
Module 7.5V х 16.66F 2 2 52 32 101.5 10 - 235
Модуль 10V х 12.5F 2 2 52 32 128 10 - 290
Module 12.5V х 10F 2 2 52 32 145 10 - 350
Module 15V х 8.33F 2 2 52 32 181 10 - 500
Module 20V х 6.25F 2 2 59 52 128 10 - 580
Module 25V х 5F 2 2 59 52 154 10 - 700
Module 30V х 4.16F 2 2 59 52 181 10 - 880


Note 1:

- Type-1 with lower ESR and leakage current, operating temperature range from –50°C to +65°C (MIK-1-1, MIK-1-2);

- Type-2 with extended operating temperature range from -60°C to +65°C (MIK-2-1, MIK-2-2).


Note 2:

- Version 1 are sealed modules in non-insulated metal square case with unidirectional polar wire leads. Modules are designed for internal wiring with higher humidity resistance of 98% at temperature 25°С and 35°С.

- Version 2 are sealed modules in non-insulated metal square case with unidirectional polar wire leads (leaves acc. To GOST 22376). Modules are designed for internal wiring with higher humidity resistance of 98% at temperature 25°С and 35°С.

Dimensional drawing of supercapacitor modules MIK

figure 1


figure 1 (A)



1 - marking example

figure 2 (also see fig. 1)


figure 3 (also see fig. 1)





Electrical parameters for supercapacitor modules MIK
Rated voltage, V Rated capacitance, F Leakage current, µA, (72 hours) Self-discharge, U, V ESR DC, MOhm
5 7.5 40 1.25 82
5 25 160 1.25 32
7.5 5 40 1.875 123
7.5 16.66 160 1.875 48
10 12.5 160 2.5 64
12.5 10 160 3.125 80
15 8.33 160 3.75 96
20 6.25 160 5 128
25 5 160 6.25 160
30 4.16 160 7.5 192
5 7.5 60 1.15 170
5 25 240 1.15 64
7.5 5 60 1.7 255
7.5 16.66 240 1.7 96
10 12.5 240 2.25 128
12.5 10 240 2.85 160
15 8.33 240 3.35 192
20 6.25 240 4.5 256
25 5 240 5.5 320
30 4.16 240 6.8 384